Art-Ply® CF Special Soft Lamination Film | Adhesive-Free CFRP Impact & Vibration Damping Interlayer
    Publish time 2026-10-29 16:17    

DPF Art-Ply CF special soft lamination film: thermoplastic elastomer, ~10MPa flexural modulus, 152°C melting, bonds to metal/plastic/wood/CFRP without adhesive, improves impact and acoustic damping for automotive lightweighting.

Art-Ply® CF Special Soft Lamination Film | Adhesive-Free CFRP Impact & Vibration Damping Interlayer

Affiliation: Shenzhen Qianhai Yuzhuo (Apex) — Authorized Distributor of Mitsubishi Chemical

Meta description: DPF newly developed Art-Ply® CF special soft film for lamination — a special thermoplastic elastomer with flexural modulus ~10 MPa and melting point 152°C, bonding without adhesive to metal, plastic, wood, and CFRP at 200–220°C press. Laminating improves CFRP impact resistance, acoustic damping, and vibration isolation for automotive lightweighting, sports gear, and prosthetics.

Models: Art-Ply® CF (standard sample: 1000 mm wide × 200 μm thick, single-side PET film)


 

Art-Ply® CF newly developed special soft lamination film positioning


Core Value

Art-Ply® CF — an ultra-soft elastomer between rubber and PP; lamination = performance enhancement

· Ultra-softness: Flexural modulus ~10 MPa, far below ordinary h-PP at ~1000 MPa.

· Adhesive-free bonding: Bonds well to SUS304, tinplate, ABS, PC, aluminum, acrylic, rigid PVC, MDF, cork, and foamed PP at 200–220°C press without any adhesive.

· CFRP enhancement: Peel strength to CFRP 19.2 N/cm at room temperature and 26.3 N/cm after heat aging (material break); bond does not degrade after heat aging.

· Vibration damping & sound absorption: Hammer-tap vibration damping outperforms pure CFRP/aluminum sheets, with fewer resonance peaks and faster decay.

· Easy storage & processing: No −30°C cold storage required; long-term room-temperature storage; easy to process into uniform-thickness parts.

· Sample-friendly: Samples available at 1000 mm wide × 200 μm thick (single-side PET), plus small rolls and A4 cuts.


Product Description

Art-Ply® CF is a newly developed special soft film for lamination from Diamond Plus Film (DPF), belonging to a special thermoplastic elastomer. It is far more flexible than ordinary PP, offers good adhesion to various materials, excellent impact resistance, and sound-absorbing effect. It is used as a performance-enhancing layer laminated between materials.

1. Material Positioning & Basic Properties

Art-Ply® CF has a flexural modulus of ~10 MPa, positioned between rubber and PP (h-PP ~1000 MPa, r-PP ~650 MPa, TPO ~200 MPa). Basic physical properties: flexural modulus MD 9 MPa / TD 7 MPa (200 m/min), 13 MPa (300 m/min); elongation at break MD 730% / TD 790%; heat shrinkage MD 6.1% / TD 0.1% (120°C × 15 min); melting point 152°C (DSC 10°C/min). Standard structure: matte surface / single-side PET release layer — release PET 75 μm + Art-Ply® CF 200 μm.

2. Adhesive-Free Bonding to Diverse Materials

At 200–220°C press molding, Art-Ply® CF bonds well without adhesive to SUS304 metal, tinplate, ABS, PC, and other materials. At 155°C press molding, it bonds equally well to aluminum, acrylic, rigid PVC, MDF (wood fiber + synthetic resin), cork, and foamed PP.


 

Art-Ply® CF adhesive-free bonding performance evaluation on various materials


3. CFRP Lamination Application & Performance

Pressed with CFRP prepreg without primer or adhesive: room-temperature peel strength 19.2 N/cm; after heat aging (100°C × 350 h) 26.3 N/cm (material break); bond strength remains unchanged after heat aging. Dupont impact test (1 kg, 1/4-inch tip, 30 cm): CFRP/ArtPly-CF laminate shows no damage and no marks, while pure CFRP is damaged. Charpy impact and interlaminar shear tests show that increasing layer count raises energy absorption; cracks occur within the CFRP layers, not at the film interface.

4. Vibration/Acoustic Damping & Applications

Hammer-tap vibration damping: compared with CFRP alone, the ArtPly-CF laminate offers better decay; compared with a 0.6 mm aluminum sheet alone, a three-layer structure (0.3 mm Al / AP-CF 200 μm / 0.3 mm Al) provides better damping. In frequency response, the ArtPly-CF laminate has fewer resonance peaks, shortening vibration decay time and suppressing resonance.


 

Art-Ply® CF for CFRP lamination — impact and vibration damping performance

 

Art-Ply® CF application suggestion examples


Key Advantages

(I) Ultra-Soft Flexural Modulus, Lamination = Enhancement

Art-Ply® CF flexural modulus is ~10 MPa, far below ordinary PP at ~1000 MPa. Laminated between CFRP/metal/wood materials, it acts as a tough interlayer that absorbs impact and vibration energy, improving impact resistance and acoustic damping.

(II) No Adhesive Needed — One Film Bonds Many Materials

Comparison

Pure CFRP

CFRP + Art-Ply® CF

Room-temp peel strength

—

19.2 N/cm

Peel strength after 100°C × 350 h

—

26.3 N/cm (material break)

Dupont impact (30 cm)

Damaged

No damage, no marks

Interface delamination

—

Cracks within CFRP layer; no interface delamination

Note: Data from MCG; representative values, not guaranteed.

(III) Room-Temp Storage, Process-Friendly

Unlike CFRP prepreg which requires −30°C cold storage, Art-Ply® CF can be stored long-term at room temperature with no cold chain; it processes well, easily forms uniform-thickness parts, and can be vacuum-formed (circular mold and autoclave produce CFRP).


Technical Specifications

Item

Parameter

Product type

Special soft film for lamination (special thermoplastic elastomer)

Flexural modulus

MD ~9–13 MPa / TD ~7–13 MPa (200 μm thick)

Elongation at break

MD ~730% / TD ~790%

Melting point (DSC)

152°C

Heat shrinkage (120°C × 15 min)

MD ~6.1% / TD ~0.1%

Standard structure

Matte surface / single-side PET release layer; release PET 75 μm + Art-Ply® CF 200 μm

Press-bonding temperature

200–220°C (metal/plastic); 155°C (aluminum/acrylic/rigid PVC/MDF/cork/foamed PP)

Peel strength to CFRP

Room temp 19.2 N/cm; after 100°C × 350 h 26.3 N/cm (material break)

Available samples

1000 mm wide × 200 μm thick (single-side PET); small rolls, A4 cuts

Note: The above data are representative values from DPF/MCG product literature, not guaranteed values; please pre-test for evaluation.


Applications

Automotive

· Bumpers: lightweighting, anti-chip.

· Roof, hood: reduce engine noise and rain sound.

· Interior materials: maintain cabin quietness.

Sports Equipment

· Bats, golf shafts, bicycle frames, guards, helmets: anti-shattering, vibration damping.

Medical & Industrial

· Prosthetics: impact cushioning.

· Robots, various equipment: vibration damping.

· Building materials: noise reduction, vibration damping.


FAQ

Q: What material is Art-Ply® CF? 

A: A newly developed special soft film for lamination from DPF, belonging to a special thermoplastic elastomer. Its flexural modulus is ~10 MPa — far more flexible than ordinary PP — and when laminated it acts as a performance-enhancing layer improving impact resistance and vibration/sound damping.


Q: Do I need to apply adhesive to bond it to CFRP/metal? 

A: No. At 200–220°C press, Art-Ply® CF bonds without adhesive to SUS304, tinplate, ABS, PC, and more; at 155°C it bonds equally well to aluminum, acrylic, rigid PVC, MDF, cork, and foamed PP.


Q: How much performance improvement after CFRP lamination? 

A: Peel strength to CFRP is 19.2 N/cm at room temperature and 26.3 N/cm (material break) after 100°C × 350 h heat aging. Under Dupont impact at 30 cm, the laminate shows no damage or marks while pure CFRP is damaged. Charpy impact shows that more layers increase energy absorption, with cracks not occurring at the film interface.


Q: Does it require cold storage? 

A: No. Unlike CFRP prepreg requiring −30°C storage, Art-Ply® CF can be stored long-term at room temperature, processes well, easily forms uniform-thickness parts, and can be vacuum-formed.


Q: Can I get samples? 

A: Yes. Samples are available at 1000 mm wide × 200 μm thick (single-side PET), plus small rolls and A4 cut sizes.




Get a Quote / Contact Us

Apex — Authorized Distributor of Mitsubishi Chemical

Email: qhyz@apexe.net