PILLAR porous carbon suction rollers SR and aerostatic bearing rollers ABB/ABR. SR grips webs by porous carbon; ABB/ABR float webs on an air film - low tension, no scratches, particle-free, near-silent for LCD/OLED, optical film and lithium foil.




Affiliation: Apex — Authorized Distributor of PILLAR Corporation
Meta description: PILLAR (Japan) porous-carbon Suction Roll (SR) delivers high-grip vacuum conveyance of web materials, while the air-bearing roll ABB/ABR (PC3RCA series) levitates web stock on a uniform gas film for truly non-contact transport — low tension, no slip, no particles, no static, near-silent. For LCD/OLED, optical films and lithium-battery foils. Authorized distributor: Shenzhen Qianhai Yuzhuo (Apex).
Models: Suction Roll SR; air-bearing roll ABB/ABR (PC3RCA-roll diameter/face length-ACNA)
Porous carbon suction roll SR — high-grip vacuum conveyance of web stock
Core Value
PILLAR Suction Roll SR + Air-Bearing Roll ABB/ABR — two porous-carbon web-handling solutions: choose high-grip contact suction or true non-contact float.
· Porous-carbon roll surface: the roll face uses uniformly permeable porous carbon; fluid acts evenly across the whole surface whether suction conveyance or floating transport.
· High-grip suction (SR): after evacuation, films/foils are sucked uniformly across the roll face, transported without wander or slip — ideal for high-precision traction feeding.
· True non-contact float (ABB/ABR): compressed air forms a uniform fluid film between the roll face and web, supporting the entire web on a gas film with no contact and no scratching.
· Low-tension handling: prevents web deformation and contact-slip damage; optimized assembly accuracy reduces alignment-error influence.
· Clean and anti-static: porous carbon is a good conductor, hardly charges or sheds particles, and consumes little air.
· Low-noise stable float: the uniform fluid film supports the web with near-zero operating noise; the gap is set by supply pressure and stays essentially unchanged as speed varies.
Product Description
PILLAR (Japan) extends its proprietary high-strength porous-carbon technology into web handling, forming two complementary roller families: the Suction Roll (SR), which evacuates the roll face to suck web stock for high-grip contact feeding traction; and the air-bearing roll ABB/ABR (Air Bearing Roll), which uses hydrostatic gas-bearing technology to levitate web stock non-contact for ultra-thin, scratch-sensitive materials. The two are selected and paired according to whether the process permits contact and what tension is required.
1. Operating Principle and Technical Breakthrough
· Suction Roll SR principle: the roll face is porous carbon; after evacuation air passes uniformly across the whole surface, the web is sucked tight against the roll face and drawn smoothly as the roll rotates. The porous × carbon structure achieves high-grip web conveyance without wander or slip.
· Air-bearing roll ABB/ABR principle: this is a web-control levitation transport roll using hydrostatic gas-bearing technology. The porous carbon acts as a permeable "air ring", letting compressed air form a uniform fluid film between roll face and web; the film supports the entire web evenly, preventing failures caused by frictional drive. The gas bearing is precisely what stabilizes the fluid film supporting the web.
2. Performance and Precision Parameters
· Air-bearing roll gap characteristics: the gap is set by supply pressure; it stays essentially unchanged even as transport speed changes; as tension rises, the web floats within the gap.
· Roll diameters: Ø75 / Ø100 / Ø125 / Ø150 mm.
· Face length: 100–1000 / 1500 / 2500 mm (specified in 25 mm increments).
· Supply pressure: 0.3–0.5 MPa.
· Tension and wrap angle: tension approx. ≤300 N/m; wrap angle 60–180°.
Air-bearing roll float-conveyance experiment — web in non-contact levitation
3. Materials and Product Applicability
· Main materials: carbon ring (porous carbon), shaft (aluminum white anodized), journal (SUS430), pressure ring (aluminum black anodized).
· Working fluid: clean air, class 1.6.1 (JIS B 8392-1).
· Environment: operating temperature 23 °C ±3 °C, indoors, no corrosive gases/vapors/chemicals/dust; transport temperature 20 °C ±40 °C.
· Applicable webs: films, foils, FPD glass substrates and other roll-to-roll processing; web length ≥10 m, thickness ≥12 µm, transport speed 10–100 m/min.
Air-bearing roll float-conveyance test rig — stable web support with floating gap
4. Core Value and Application Benefits
· Low-tension handling: prevents web deformation.
· Slip prevention: prevents damage caused by contact with the roll.
· Low air consumption: porous holes raise efficiency and reduce air use.
· No particles, no static: carbon is a good conductor; fluid passing through the porous body is clean.
· Low stress, low noise: the uniform fluid film supports the web; operating noise is near zero.
· Optimized assembly accuracy: reduces alignment-error influence and suppresses groove marking on the roll.
PILLAR products in a semiconductor / flat-panel-display web line installation
Key Advantages
(1) Non-Contact Transport: ABB/ABR Solves Ultra-Thin / High-Sensitivity Web Handling
The gas film supports the web evenly, avoiding scratching, slip and electrostatic damage caused by contact, with near-silent operation. Porous-carbon holes raise air-utilization efficiency for low consumption; the carbon's conductivity suppresses static at the source.
(2) SR and ABB/ABR Are Complementary: High-Grip Contact Suction and Non-Contact Float as Needed
· Suction Roll SR: evacuates the porous-carbon roll face to suck the web, providing high-grip contact traction feeding where stable pull positioning is needed.
· Air-Bearing Roll ABB/ABR: uses compressed air to form a gas film between roll and web for truly non-contact floating transport, suited to ultra-thin, scratch-prone, low-tension webs.
(3) Stable Float and Low Particle Generation
· The gap is set by supply pressure and stays essentially unchanged as transport speed varies, giving stable levitation.
· The porous carbon used in the gas-bearing roll is a stable porous-carbon material with highly bonded grain boundaries; friction particles from passing air do not shed. Every step from material to parts to finished product is cleaned, for minimal particle generation.
(4) Rental Validation and Selection Support
Products can be loaned out to confirm performance; a ready web-levitation test rig is available to provide float-characteristic data under customer web conditions (length ≥10 m, thickness ≥12 µm, tension ~200 N/m, transport speed 10–100 m/min).
Technical Specifications
Item | Parameter |
Suction Roll SR | |
Product form | Porous-carbon roll for web conveyance, vacuum high-grip handling |
Roll-face material | Uniformly permeable porous carbon |
Specific roll diameter / face length | TBD (per SR selection catalog) |
Air-Bearing Roll ABB/ABR (PC3RCA series) | |
Model | PC3RCA-roll diameter/face length-ACNA |
Roll diameter | Ø75 / Ø100 / Ø125 / Ø150 mm |
Face length | 100–1000 / 1500 / 2500 mm (25 mm increments) |
Overall length | Face length + 175 mm |
Supply pressure | 0.3–0.5 MPa |
Tension | approx. ≤300 N/m |
Wrap angle | 60–180° |
Working fluid | Clean air, class 1.6.1 (JIS B 8392-1) |
Operating temperature | 23 °C ±3 °C |
Ambient pressure | Atmospheric |
Main materials | Carbon ring (porous carbon), shaft (aluminum white anodized), journal (SUS430), pressure ring (aluminum black anodized) |
Alignment accuracy | Roll parallelism angle controlled within ±0.5° |
Service life | 1 year under specified environment (use beyond range not restricted) |
Note: detailed SR roll diameter / face length / vacuum parameters are image-based catalog pages and were not extracted as text, hence marked TBD; refer to the latest selection catalog. Air-bearing roll specifications follow the "Air Bearing Roll" catalog and operation manual.
Applications
LCD / OLED and Optical Films
· Low-tension non-contact transport of FPD glass, optical films, polarizers and similar webs.
· Floating transport and suction feeding in optical-film coating processes.
Lithium Batteries and Foils
· Non-contact handling of ultra-thin copper and aluminum foils, preventing slip and scratching.
Photovoltaics
· Low-tension transport and traction of photovoltaic thin-film webs.
Precision Coating and Roll-to-Roll
· Stable float and high-grip traction in precision coating, laminating and slitting.
· Damage-free handling of ultra-thin, high-value-added webs.
FAQ
Q: What is the difference between an air-bearing roll (ABB/ABR) and a suction roll (SR)?
A: The air-bearing roll uses compressed air to form a gas film between roll face and web for truly non-contact floating transport, suited to ultra-thin, scratch-prone, low-tension webs. The suction roll SR evacuates the porous-carbon roll face to suck the web for high-grip contact traction feeding. The two are selected and paired according to whether contact is permitted and what tension is required.
Q: What determines the air-bearing roll's floating gap? Does it change with speed?
A: The gap is set by supply pressure and stays essentially unchanged even as transport speed varies; as tension increases, the web floats within the gap. Operating pressure should be managed within the 0.3–0.5 MPa range.
Q: Does the air-bearing roll shed particles or charge static?
A: The porous carbon used is a stable porous-carbon material with highly bonded grain boundaries; friction particles from passing air do not shed, so particle generation is minimal. Carbon is a good conductor and hardly charges. Supply air must be class 1.6.1 clean air to avoid oil/solids clogging the porous carbon.
Q: What are the installation and operating precautions?
A: Allow ≥24 hours temperature conditioning at 23 °C ±3 °C before installation; control roll parallelism within ±0.5°; support by the journal when moving, and never touch the transport face with bare hands; keep water, dust and oil off the porous carbon; install safety devices to protect web and equipment if pressure is interrupted.
Q: Can PILLAR validate a web-handling solution before purchase?
A: Yes. PILLAR offers product rental and maintains a dedicated web-levitation test rig that can supply float-characteristic data for your web conditions (length ≥10 m, thickness ≥12 µm, tension ~200 N/m, speed 10–100 m/min), so performance can be confirmed before committing to a full line.
Get a Quote / Contact Us
Apex — Authorized Distributor of PILLAR Corporation
Email: qhyz@apexe.net